- 微生物專用設備
- 細胞專用設備
- 基礎理化設備
- 溶液處理移液設備
- 蛋白質專用設備
- Cellpro
- 試劑類
- 培養基類
- 實驗室耗材類
- 儀器維修&校正服務
- 防疫專區
- infitek系列
- pakgent系列
- 塑膠耗材類別
- 冷藏冰箱
-
商品資訊
Description
Application
CO2 Incubator is widely used in modern medicine, biology, chemistry and agriculture science for the culture of biological cells, tissues and bacterial.Features
Faster CO2 concentration restoration speed
If the door needs to be opened frequently during the experiment, infrared sensors are the best choice.
The imported infrared (IR) sensor has the characteristics of fast monitoring of carbon dioxide gas and is not affected by fluctuations in external temperature and humidity.Internal circulation system
Adopts high-quality fan, higher ventilation efficiency and better temperature uniformity.
The circulation fan speed can be automatically controlled.High cleanliness level
The door temperature controller can effectively prevent condensation on the glass door of the incubator and prevent the possibility of microbial contamination caused by condensation water from the glass door.
The CO2 air inlet is equipped with a high-efficiency microbial filter. For particles with a diameter of 0.3μm or greater, the filtration efficiency is as high as 99.99%, effectively filtering bacteria and dust particles in CO2 gas.
HEPA high-efficiency filter can effectively filter out bacteria and dust particles in the outside air, keeping the incubator in a sterile state.Humanized design
Two-layer stacking makes full use of laboratory space.
Large-screen LCD display, microcomputer PID control and can simultaneously display temperature, CO2 concentration, relative humidity and operation, fault prompts, etc.;
The menu-based operation is simple and easy to understand and facilitate observation and use.
Safety
With temperature limit alarm system and visible& audible alarm system.
Low temperature, high temperature and over-temperature alarms, CO2 too high or too low concentration alarms.
Safety facilities such as alarms if the door is opened for too long and UV sterilization working status reminders.Specifications
Model ICB-CO2-40Y ICB-CO2-80Y ICB-CO2-150Y ICB-CO2-190Y ICB-CO2-240Y Capacity(L) 40 80 155 190 240 Circulation Mode Forced convection Dimension (W*D*H)
Internal (mm) 400*286*350 400*450*500 480*530*610 520*530*690 600*630*670 External (mm) 590*440*576 590*687*790 670*767*880 708*710*1030 788*837*940 Temperature Range (℃) RT.+5~55 Fluctuation (℃) ±0.1 Resolution (℃) ±0.1 Uniformity (℃) ±0.3°C (37℃) Recovery (Door open 30s, recovery to 37℃ ≤ 8min Humidity Range >90% Method Natural vaporization CO2 Range 0~20% Resolution +0.1% Sensor IR sensor Recovery (Door open 30s, recovery to 5%)≤3min Heating Method Air-jacketed, PID Control Display LCD Material Internal 304 Stainless steel External Cold rolled steel Shelves(Standard / Max ) 2/4 2/4 3/6 3/6 3/6 Test Hole (mm) φ25 Safety Device Temperature limit alarm, visible& audible alarm, Low temperature, high temperature and over-temperature alarms,
CO2 too high or too low concentration alarms,
Alarm for long door opening time,
UV sterilization working status reminder
Sterilization Method 90℃ high-temperature moist heat sterilization+UV Sterilization Electricity Voltage/ Frequency
AC 220/110V, 50/60Hz Consumption (W) 350 500 750 750 950 N.W./G.W. (kg) 50/70 64/90 85/112 90/134 95/148 Shipping Dimension (W*D*H) (mm)
650*710*740 750*710*960 840*790*1070 830*840*1300 960*900*1160 Optional 1. RS485/232 interface and communication software 2. Special CO2 pressure reducing valve
3. Humidity display system
-
商品Q&A